Select Page

Lakeside Parkway – Lets Build Scale Model Scenery BB019 Programming Track

Lakeside Parkway – Lets Build Scale Model Scenery BB019 Programming Track

Lets Build Scale Model Scenery BB019 Programming Track

 

Hello fellow club members, Neal & Amy here of Lakeside Parkway. In this article we’ll will go through and explain how I made custom programing track module.  The video linked below, shows how I did it. Starting off I built the Scale Model Scenery BB019, then I added the track using peco code 100 with concret sleepers. Next I drilled four holes for the track power wire feeds and also for an led light. Next I fitted four wires & soldered them to the track. I’ve used quick connect connectors so that i’m able to use any type of controller which will come in handy for any future changes of controllers in the future. Lastly i’ve fitted an led to the top of the board with some hot melt glue so i’m able to see if the track power is on or off.

The video can be found here…

https://youtu.be/SVDMKLYAGQY

Any questions please ask 🙂

Many thanks

Neale & Amy

 

.

 

 

 

 

 

 

 

 

 

Print Friendly, PDF & Email

About The Author

Leave a reply

Become A VIP Today!

Translate